10G PCI-E Fiber Optic Nic Card , Dual Fiber NIC Adapter fault tolerance manufacturer from China Fiberroad Technology Group

Place of Origin:

Zhejiang, China (Mainland)

Product Detail

10G PCI-E Fiber Optic Nic Card , Dual Fiber NIC Adapter fault tolerance

Features:
<ul

10G PCI-E Fiber Optic Nic Card , Dual Fiber NIC Adapter fault tolerance

Features:

Teaming support :

IEEE 802.3ad (link aggregation control protocol)
Test switch configuration
PCIe Hot Plug*/Active peripheral component interconnect (PCI)
IEEE 802.1Q* VLANs
IEEE 802.3 2005* flow control support
Tx/Rx IP, TCP, & UDP checksum offloading (IPv4, IPv6) capabilities (Transmission control protocol (TCP), user datagram protocol (UDP), Internet protocol (IP)
IEEE 802.1p*
TCP segmentation/ large send offload
MSI-X supports Multiple Independent Queues
Interrupt moderation
IPv6 offloading — Checksum and segmentation capability extended to new standard packet type

Speed/Port	10Gbps - Fiber for Servers and Workstations
Ethernet Controller(s)	Intel® 82599ES
Connector & Cable Medium	LC Fiber Optic
Cabling Type	MMF 62.5/50 µm, up to 300 m
Slot Type, Maximum Bus Speed & Slot Width	PCI Express* 2.0 5.0 GT/s x 8 Lane
Ports	Dual Port
Bus type	PCI Express 2.0 (5 GT/s)
Bus width	4-lane PCI Express and 8-lane PCI Express
Physical Layer Interface	10GBASE-SR 10GBASE-LR
Data rate supported per port:	Optical: 1 GbE/10 GbE Direct Attach: 10 GbE
Network Standards	IEEE 802.3 SFP+ 10GBASE-SR
Interrupt levels	INTA, MSI, MSI-X
Intel® VT for Connectivity1	Virtual Machine Device Queues (VMDq) Virtual Machine Direct Connect (VMDc)
Security Features	IPSEC/LinkSec
IWARP/RDMA	NA
Typical power consumption	Maximum Power10.7 W Typical Power 10.0 W
Operating temperature	0° C to 55° C (32° F to 131° F)
Air Flow	Minimum of 100 LFM required
Storage temperature	-40° C to 70° C (-40° F to 158° F)
Storage humidity	90% non-condensing relative humidity at 35° C
LED Indicators	LINK (solid) and ACTIVITY (blinking) LINK SPEED (green = 10G / yellow = 1G)